Inspect the Existing System
We check the panel, the breakers, and the wiring for corrosion, heat damage, and loose connections.
Residential Electrical Service
Old panel? Breakers that keep tripping? We will look at it and tell you whether it needs a repair or a replacement.
Request a Panel Inspection Call NowThe center of your electrical system
Your panel feeds every circuit in the house. Lights, outlets, the range, the furnace. When it starts to fail, the trouble shows up in rooms nowhere near it.
We replace and repair panels for homeowners in Roanoke and the towns nearby. Bad breakers, subpanels, half a house with no power, and full service upgrades.
We look at the whole system before we tell you to replace anything.
Repair or replace?
A tripping breaker does not mean the panel is bad. It is often one worn breaker, a loose connection, or a circuit with too much on it. We find the cause first. We tell you to replace the panel when the panel is really the problem.
One house had lost power to half its rooms. We opened it up and found heavy corrosion around the meter and trouble in the underground service wire. That was an electrical service repair, not a breaker swap.
Another job looked worse than it was. A pool subpanel had burned breakers and damaged parts inside, but the main service was fine. We rebuilt the subpanel and left the rest alone.
Electrical TroubleshootingWhat to expect
We check the panel, the breakers, and the wiring for corrosion, heat damage, and loose connections.
We size the new panel for what your house pulls now, plus room for what you might add later. A generator, a shop, an EV charger.
We pull the permit when the job needs one and set up the disconnect and reconnect with the power company.
With the power off, we pull the old panel and check the wiring behind it before anything goes back on.
We set the new panel, land every circuit on the right breaker, and dress the wiring so the next electrician can read it.
We bring the power back up and test every circuit before we leave.
Planning for electrical demand
A new panel fixes what is broken and gives you room to grow. We look at what the house pulls today before we pick one.
Your heat pump, range, dryer, and water heater pull the most power in the house.
Additions, remodels, and shops need open breaker space. Sometimes more service than the house has.
Planning an EV charger or a generator? Size the panel for it now and save yourself a second job.
A big new load does not always mean a new panel. Some houses already have the room. We check before you spend the money.
Electrical panel FAQs
Look for rust, scorch marks, breakers that trip over and over, or rooms that lose power. A panel with no open slots left is another sign. We inspect it to know for sure.
Yes, if the breaker is the problem and the panel is sound. We check the panel first.
Get it looked at soon. What it takes to fix depends on where the rust is and how far it has gone into the panel or the meter.
Yes. The panel has to be dead while we work. On some jobs the power company pulls the meter and resets it afterward.
Most panel and service work does. We pull the permit and handle the inspection.
No. The panel is one piece of it. The service also takes in the meter and the wires feeding the house. Sometimes only one of them needs work.
Panel replacement for Roanoke homeowners
Your panel has one job: get power to every room safely. If yours is damaged, keeps giving you trouble, or has no room left, we will look at it and tell you what it needs.
Call us to set up a panel inspection in Roanoke or a nearby town.
Request a Panel Inspection